Kids Classical Music

Articles · Instruments

How string instruments make sound: length, tightness, and weight

Updated 2026-11-14

A string instrument makes sound when a stretched string vibrates. The string might be plucked, like a guitar. It might be bowed, like a violin. Or it might be struck, like inside a piano. Three things decide how high or low a string sounds: its length, how tight it is, and how heavy it is.

Three ways to start a string

How Instruments
Plucked Guitar, harp, ukulele, banjo, sitar
Bowed Violin, viola, cello, double bass, erhu
Struck Piano, hammered dulcimer

The three rules of pitch

1. Length. A shorter string vibrates faster and sounds higher. When a violinist presses a finger on a string, it makes the vibrating part shorter, so the note goes up.

2. Tightness. A tighter string sounds higher. Turning a tuning peg tightens or loosens the string. Read why instruments go out of tune.

3. Weight. A thicker, heavier string sounds lower. On a guitar, the low strings are thick and the high strings are thin.

These rules were written down by a French scientist, Marin Mersenne, almost 400 years ago.

Why the body matters

A string alone is quiet. It is too thin to push much air. The string passes its vibration through the bridge into the wooden body. The body vibrates too, and its large surface pushes much more air. That makes the sound loud enough to hear across a room.

  • On a violin, a small post inside, called the soundpost, carries the vibration from the top to the back. The curvy f-holes let the sound out. Read parts of the violin.
  • On a guitar, the round sound hole lets the sound out.
  • On a piano, a big wooden soundboard under the strings makes the sound grow. Read parts of the piano.

How a bow works

A bow is made of horsehair. Players rub a sticky substance called rosin on the hair. As the bow moves, the hair grabs the string, pulls it, lets it slip, and grabs it again, hundreds of times a second. That keeps the string vibrating. Read how to rosin a violin bow.

Overtones

A vibrating string does not only move as one big swing. It also vibrates in halves, thirds, quarters, and smaller parts, all at once. These give extra, quieter pitches called overtones. The mix of overtones helps make a violin sound like a violin and a guitar sound like a guitar. Read what is timbre?

Try it at home

  1. Rubber band test. Stretch a rubber band over a box. Pluck it. Stretch it tighter and pluck again.
  2. Shorter is higher. Press a pencil down on the band to make the vibrating part shorter.
  3. Thick and thin. Use a thick band and a thin band. Which is lower?
  4. With and without a box. Pluck a rubber band stretched between two fingers. Then stretch it over a box. Which is louder?

Read string instruments for kids and how many strings on a violin, cello, harp, and guitar.

Use it with your kids

Print a listening page, a practice chart, or a composer fact sheet. Or try a tool, such as the composer timeline or the piece picker.

Free printablesTools