A violin starts as two kinds of wood: spruce for the top, and maple for the back, the sides, and the neck. A maker cuts, bends, carves, and glues about 70 pieces, and then varnishes the body. A person who makes violins is called a luthier. By hand, the work takes weeks, and the wood dries for years before the first cut.
Quick facts
- The maker: a luthier
- Top: spruce
- Back, sides, neck, and scroll: maple
- Fingerboard: ebony, a hard black wood
- Glue: hide glue, made from animal hides
- Pieces: about 70
- Metal parts: none in the body. No nails and no screws hold a violin together
Why spruce and maple?
Spruce is light and stiff. A thin plate of it shakes with little effort, so it makes a good top.
Maple is harder and stronger. It makes a firm back and a neck that can take the pull of the strings. Many maple backs show stripes that shimmer in the light. Makers call the stripes flame.
The steps
1. Dry the wood
The wood is cut into wedges and stacked in open air to dry. This takes years. Wood that is still wet will warp and crack after the violin is built.
2. Bend the ribs
The ribs are the sides of the violin. The maker planes strips of maple until they are about one millimeter thick. Each strip is pressed against a hot iron and bent into a curve.
The curved strips are glued to small blocks of wood around a mold. The mold is a flat board with the outline of the violin. When the ribs are done, they form a wall in the shape of the body.
3. Carve the top and the back
Two wedges of wood are glued side by side to make one board. That is why many violins show a seam down the middle of the back.
The maker saws out the outline and then carves the outside into a gentle arch with gouges, tiny planes, and scrapers. Then the inside is hollowed out. A finished plate is a few millimeters thick, and the thickness changes from place to place.
Makers tap the plate and listen as they carve. The sound helps them judge when to stop.
4. Cut the f-holes and fit the bass bar
The two f-holes are cut into the top with a fine saw and a knife. Then the bass bar, a long strip of spruce, is glued to the inside of the top.
5. Set in the purfling
The maker cuts a narrow groove near the edge of the top and the back. A thin strip of wood goes into the groove. This is the purfling, and it helps to stop cracks at the edge.
6. Close the box
The mold comes out. The top and the back are glued to the ribs with hide glue.
Hide glue holds well, and it lets go with heat and moisture. A repairer can open the violin years later without breaking the wood.
7. Carve the neck and the scroll
The neck, the pegbox, and the scroll come from one block of maple. The scroll is carved by hand into a spiral. Then the neck is fitted into a slot at the top of the body and glued.
8. Varnish
The body gets many thin coats of varnish. Each coat has to dry before the next one goes on, so this step can take weeks. Varnish protects the wood from sweat and wear, and it gives the violin its color.
9. Set it up
The last step turns a wooden box into an instrument.
- The ebony fingerboard is glued to the neck.
- The pegs are fitted to their holes.
- The sound post is stood up inside the body with a thin tool that reaches through an f-hole.
- The bridge is carved so that its feet fit the curve of the top.
- The strings go on, and the maker plays the first notes.
Read parts of the violin for kids for the job of each part.
Handmade and workshop violins
A luthier who works alone makes a small number of violins a year.
Student violins come from workshops and factories. Machines cut and rough out the parts, and workers finish and assemble them. This is why a student violin costs far less than a handmade one. The setup still matters. A shop that fits the bridge, the sound post, and the strings with care can make a plain violin much nicer to play.
Small violins for children are made the same way. Read violin sizes for kids and renting vs. buying an instrument for a child.
Makers to know
The violin took its shape in northern Italy in the 1500s. The best-known maker is Antonio Stradivari, who worked in the city of Cremona. Read Stradivarius violins: why they are famous.
Things to do together
Find the seam. Look at the back of a violin. Find the line down the middle where two pieces of maple meet.
Find the flame. Tilt the violin under a lamp, and watch the stripes in the maple move.
Tap and listen. Tap a wooden spoon, a cutting board, and a tabletop with a knuckle. Talk about which rings and which thuds.
Visit a shop. Many violin shops have a workbench in view. Ask to see a bridge or a scroll that is not finished yet.
Print and play
Read the violin for kids and string instruments for kids. For care at home, read how to tune a child’s violin.
More from this guide
This article is part of Instruments of the orchestra for kids: the four families and how they sound.
Accordion for kids: how it works and what to hear
The accordion for kids and parents: how the bellows, reeds, keys, and bass buttons work, its cousins, music to hear from many countries, and how to start.
Appalachian dulcimer for kids: a first instrument guide
Appalachian dulcimer for kids: the lap instrument from the mountains of the United States, its three strings and drones, Jean Ritchie, and how to start.
Autoharp for kids: how it works
Autoharp for kids: the string instrument with chord bars, how the bars mute strings to make chords, classroom and folk use, and how to start.
Bagpipes for kids: how they work and what to hear
Bagpipes for kids and parents: how the bag, the chanter, and the drones work, why the sound never stops, tunes to hear, and how a child starts.
Band instrument care: a guide for parents
Band instrument care for parents: simple daily habits for flutes, clarinets, saxophones, trumpets, and trombones, and when to take it to a repair shop.
Band instruments for kids: the full list
Every instrument in a school concert band, in one list: woodwinds, brass, and percussion, how each makes sound, and which ones beginners start on.
Use it with your kids
Print a listening page, a practice chart, or a composer fact sheet. Or try a tool, such as the composer timeline or the piece picker.